Step 1. Configure IP address and DNS settings¶
Create A and PTR records for proxy.example.lan on your DNS server. Make sure Windows workstations can resolve proxy.example.lan name to 192.168.1.10 and 192.168.1.10 can be reversely resolved to proxy.example.lan.
Your Squid proxy MUST be configured with static IP address, you can do it from UI as indicated on the following screenshot or manually as explained in article How to Set Static IP Address in VA.
After you clicked Save Settings, UI will automatically generate the /etc/netplan/00-installer-config.yaml with the following contents.
network: ethernets: ens160: addresses: - 192.168.1.10/24 gateway4: 192.168.1.1 nameservers: addresses: - 192.168.1.2 search: - example.lan renderer: networkd version: 2
Next, set host name of your proxy from Admin UI as indicated on the following screenshot or by editing the
/etc/hostname file to contain a single word
Set DNS reverse resolve setting on your proxy by editing
/etc/hosts to look like the following.
127.0.0.1 localhost 192.168.1.10 proxy.example.lan proxy # The following lines are desirable for IPv6 capable hosts ::1 localhost ip6-localhost ip6-loopback ff02::1 ip6-allnodes ff02::2 ip6-allrouters
Reboot your proxy and after restart, check the output of
hostname -f command; it should give
Now check you can resolve domain names on proxy by running the following commands. Output from these commands should contain correct IP addresses and fully qualified domain names for proxy.example.lan and dc1.example.lan.
$ dig dc1.example.lan $ dig -x 192.168.1.2 $ dig proxy.example.lan $ dig -x 192.168.1.10
Specify proxy.example.lan (as FQDN and not as IP address!!!) in your browser settings on all your workstation machines. Try browsing to see if Squid works nicely without authentication.